Click and discover the product details.
NI500 WATER LEVEL
From: 504,00 €
NI500 Submersible Water Level Sensor is designed for measuring tank levels or open water applications when fully submerged in liquid. Its pressure sensor is not affected by foam, wind, or rain.
NI500 Submersible Water Level Sensor is specifically designed for measuring tank levels or open water applications when fully submerged in liquid. Its pressure sensor is not affected by factors such as foam, wind, or rain. The sensor is built to be durable and sealed to prevent corrosion and failure. It is ideal for measuring water levels but can also be customized for measuring non-corrosive liquids like oil. Our sensor features a full-sealed plastic waterproof design, making it suitable for outdoor use.
By combining with LoRaWAN® gateway (NI65, NI67, NI400L) and IoT Cloud solution, users can manage all sensor data remotely and visually. With easy configuration and installation, our Lora water level sensor provides a seamless user experience.
Enterprises are continuously faced with increasing challenges and are working towards deploying IoT technology in gasoline level monitoring and measurements. This allows them to detect real-time and accurate gasoline volume, even in the face of wide temperature swings, rough handling, and harsh environments.
Some key features of our Lora water level sensor include ultra-low power consumption and easy deployment. With a built-in 19000 mAh high-capacity battery, the sensor can be used for 10 years without needing frequent replacements. Overall, our Lora water level sensor offers a reliable, wireless, and technologically advanced solution for efficient water level monitoring.
Applications
- Dams
- Energy
- Environment
- Landslides
- Oil&Gas
- Water
- Frequency: CN470/RU864/IN865/EU868/US915/AU915/KR920/AS923
- Wireless: LoraWan Based
- Sensitivity: -137dBm @300bps
- Protection: IP67 waterproof
- Pressure Type: Gauge Pressure
- Range: 0 ~ 3m/5m/10m (H2O) (Customizable up to 200 m and for other liquids)
- Accuracy: ± 0.5% FS
- Resolution: 0.01 m
- Long-term Stability: ≤ ± 0.3% FS/year
- Operating Temperature: Transceiver: -30°C to +70°C, Pressure Sensor: -10°C to +60°C
- Dimension: 105.4 × 71 × 69.5 mm (Probe and cable are not included)
- Mounting: DIN rail, wall
- Power Supply: 19000 mAh Li-SOCL2
| Measuring range | 10m3m5m |
|---|
-
NIVWSG VIBRATING WIRE STRAIN GAUGEThe vibrating wire strain gauges are used to measure stress in load-bearing structures or monitor tensions in tunnel linings during tunnel excavation phases.
-
NIIFF110 ANALOG INCLINOMETERThe In-place Inclinometer is a device that continuously measures deformation. The tube has two coasters, each equipped with wheels, that are inserted inside the inclinometer to measure the deformation.
-
NIMGE001 ELECTRICAL CRACKMETERThe Electric Crackmeter uses a potentiometric displacement transducer to detect changes in position between two points located near a joint or injury.
-
RM319 AIR QUALITY MONITORING SENSOR 525,00 €RM319 is an indoor air quality sensor, and it boasts 9 sensors in 1 device, including CO2, temperature, humidity, light, HCHO/O3 level, TVOC, PM2.5&PM10, motion, and barometric pressure.
-
RM307 AIR QUALITY MONITORING SENSOR 486,00 €RM307 is a professional wireless indoor ambiance sensor, and it boasts 7 sensors in 1 compact design, including humidity, temperature, light, CO2, TVOC, Motion (PIR), and barometric pressure.
-
NI300 WATER LEAK DETECTOR - ZONE 162,00 €NI300ZLD is designed for detecting the presence of liquids over a large area and is an indoor wireless LoRa water leak sensor with temperature and humidity sensing capabilities.
-
NI300 WATER LEAK DETECTOR - SPOT 108,00 €NI300SLD is a wireless LoRa water leak sensor for indoors with temperature and humidity sensors, ideal for monitoring pipe leakage, basement flooding, and pump failures.
-
NI1000 TILTMETERNI1000 Analog Tilt Meter, with its standard 4mA to 20mA current output in a three-wire system, is used in various industries, including structural health monitoring.
-
NI500 PT100 From: 234,00 €NI500 PT100 Industrial Temperature Sensor is a highly accurate temperature sensor with temperature measurements from -200 to 800°C, ideal for industrial settings.
-
NI500 ULTRASONIC DISTANCE/LEVEL From: 495,00 €NI500 Ultrasonic Distance/Level Sensor utilizes ultrasonic waves to accurately measure distances by transmitting and reflecting signals off nearby objects.
Request informations about this product
By submitting this form you declare that you have read and accepted the processing of your personal data according to the Privacy policy