NI11
45,00 €
LoRaWAN Controller
5NI11XX LoRa Controller supports LoRaWAN® class C protocol to be in full compatibility with most LoRaWAN® gateways on the market. It is ideal for large-scale IoT application deployments, such as projects for building automation, smart metering, HVAC system, etc.
With multiple interfaces, LoRaWAN® Controller can perfectly help retrofit legacy assets into IoT enablement.
Applications
- Bridges
- Building
- Dams
- Energy
- Environment
- Landslides
- Oil&Gas
- Railways
- Structural
- Tunnels
- Wireless: LoraWan Based
- Connector: 1 × 50 Ω SMA (Center PIN: SMA Female)
- Port: 1 × Micro USB Port
- Digital Inputs: 2 x Opto-isolated Digital Inputs
- Power Supply: 3-24V
- Digital Outputs: 2 x SPDT Relay Contact
- Rating: 3 Amp DC (Max: 30 V) or 3 Amp AC (Max: 250 V)
- Serial Ports: RS232/RS485
- Baud Rate: 4800~115200bps (RS232)/1200~115200 bps (RS485)
- Protocol: Transparent (RS232), Modbus RTU (RS485)
- Analog Input: 4~20 mA
- Resolution: 12 bit
- Input Voltage: 5-24V DC (Standard adapter: DC 12V/0.5A)
- Ingress Protection: IP30
- Connector: Terminal block
- Dimensions: 79 x 76 x 24 mm
- Mounting: Desktop or Wall Mounting
- Reset Button: 1 × RESET (Inside The Device)
- LED Indicators: 1 × System, 1 × ACT
- Operating Temperature: -40°C to 70°C
- Dimensions: 79 x 76 x 24 mm
- Mounting: Desktop or Wall Mounting
- Reset Button: 1 × RESET (Inside The Device)
- LED Indicators: 1 × System, 1 × ACT
- Operating Temperature: -40°C to 70°C
| Interface | 1 RS232/RS485, 1 * Digital Input, 1 * Relay Output2 * Analog Input, 1 * Digital Input, 1 * Relay Output2 * Digital Input, 2 * Relay Output |
|---|
-
NICLV000 SURFACE ANALOG TILTMETER From: 320,00 €A dual-axis MEMS-type sensor, this tool detects the angular variation of structures, providing useful information regarding rotational movements
-
NIBCV000 VIBRATING WIRE STRAIN GAUGE 60,00 €The vibrating wire strain gauges are used to measure stress in load-bearing structures or monitor tensions in tunnel linings during tunnel excavation phases.
-
NIPEPX00 RESISTIVE PIEZOMETER 300,00 €The resistive piezometer is a pressure transducer that measures interstitial pressure in soil. The absolute device measures interstitial pressure, while the relative device measures the piezometric height.
-
NI20 STRAIN GAUGE INPUT MODULE 259,00 €NI20 Strain Gauge Input Module is a signal converter designed for accurate measurements. It supports both the 6-wires and 4-wires technique, providing flexibility in data acquisition.
-
MULTIPLEXERMultiplexer board product allows you to expand the number of analog acquisition channels of the NI2400 and NI100 data logger with further 24 channels.
-
NI310 TILT SENSOR 120,00 €NI310-TIL has features like flexibility in threshold condition settings, easy configuration, and installation making it ideal for landslide and tunnel distortion monitoring.
-
NI300 WATER LEAK DETECTOR - SPOT 108,00 €NI300SLD is a wireless LoRa water leak sensor for indoors with temperature and humidity sensors, ideal for monitoring pipe leakage, basement flooding, and pump failures.
-
NI500 PIPE PRESSURE 396,00 €NI500 Pipe Pressure Sensor measures pressures from liquids and gases, ideal for monitoring tank levels and detecting leakage in pipes, and resistant to shocks and vibrations.
-
NI500 ULTRASONIC DISTANCE/LEVEL From: 495,00 €NI500 Ultrasonic Distance/Level Sensor utilizes ultrasonic waves to accurately measure distances by transmitting and reflecting signals off nearby objects.
-
NI400NI400 Wireless Data Logger offers you convenience and efficiency. With NI400, you can easily log data across 4 universal channels and through Modbus.